To add the WipeDrive software to the Aiken WorkBench you'll need to be sure your Aiken version is up to date. You can contact Aiken for verify that. 


Once that is up to date you can find the instruction as download to this page. You can also find a short video of this below there. 


Make sure you know how to change the settings of WipeDrive with the use of the wd-options.cfg config file. 

Please see this article on how to change the config file: 

http://support.global-emea.com/support/solutions/articles/48000894790-how-to-change-the-cfg-files-



If this article was not helpful and more help is needed please contact us via one of below options. 

 

  |   Email us   |   Submit a ticket   |   Give us a call    |

 

Our official support hours are 8:00 am to 16:30 pm, after those hours emailing us or submitting a ticket would be the best option. 

 

When contacting our support team, please refer to the article you’ve checked and if possible add a picture of the error and add information on the hardware that’s giving the error. Make always sure you’re using the latest version.